Tied Single Expansion Joints

Aurum Alloys is a supplier, distributor, and manufacture of Tied Single Expansion Joints, all over Mumbai, India. Aurum Alloys supplies a Full Range of Tied Single Expansion Joints; we follow all legitimate ASME standards to produce Universal Expansion Joints in various grades.

A single tied expansion joint (SEJ) consists of a bellows the element is attached to the end fitting using a threaded rod or bellows bolt. The tie rods are attached to lugs or rings that limit the length of the SEJ. Screeds and mounting hardware are designed to withstand pressure. Single Tie rods and mounting hardware are designed to withstand under pressure. The tie rods are installed to prevent axial movement and to keep the ends of the SEJs parallel. This configuration allows only two degrees of freedom, horizontal in two axes.

The amount of lateral displacement and lateral velocity of the spring is limited by the length of the bellows, and often the length of the bellows is severely limited by the stability of the column. There is a special configuration that uses only two lines. This configuration allows movement of three degrees horizontally in two axes and at an angle of approximately one.

If a large lateral offset is required a tied universal SEJ is an appropriate choice. In this case, there are two identical bellows elements, separated by a spacer in the middle, with the connecting rod fastening elements passing through both bellows elements. Each bellows element is tilted to compensate for lateral movement. The tied universal SEJ can support two degrees of motion, just like the tied single SEJ.

Benefits of Single Tied Expansion-

• The force under pressure is supported by the equipment; the external anchor is only needed for the spring force.
• It can be designed with a very low side spring ratio.

Features of Single Tied Expansion-

• Simple design, relatively low cost.
• Versatile configurations can be designed with very low side spring rates and high side mobility.
• Versatile and common throughout all industries.
• Two degrees of movement capability for tied single or universal design.
• Three degrees of movement for two tie rod design.
• There is increased traction in the tie rods.

For Our Customers:

• Design and manufacture FCCU & RFCC expansion joints (Reactor & Regenerator, Flue Gas, Turbo-Expander) in both constructions COLD WALLED (Refractory Lined) & HOT WALLED (Floating Hardware) complying with the requirements of various licensors.
• Customer service provided at Aurum Alloys & Engineering LLP is of the highest standard.
• Material used in Tied Single Expansion Joints production is of high quality.
• Equipment is updated and regularly maintained.
• You will get exactly what you need and when you need it.
• Cost effective and high quality Tied Single Expansion Joints is supplied.

Cities We Deliver To:
Montreal, Dubai, Geoje-si, Algiers, Rio de Janeiro, Gurgaon, Secunderabad, Surat, Petaling Jaya, Hanoi, Hong Kong, Pimpri-Chinchwad, Baroda, Manama, Mumbai, Coimbatore, Calgary, Vadodara, Sharjah, Indore, New Delhi, Al Khobar, Aberdeen, Navi Mumbai, Tehran, Bengaluru, Bhopal, Atyrau, Istanbul, Chennai, Chandigarh, Dammam, Ahmedabad, Mexico City, Abu Dhabi, Jakarta, Ankara, Madrid, Moscow, Ahvaz, Courbevoie, Haryana, Sydney, Gimhae-si, Los Angeles, Bangkok, Jamshedpur, Busan, Vung Tau, Milan, Pune, Caracas, Riyadh, Rajkot, Thiruvananthapuram, Kuwait City, New York, Visakhapatnam, Chiyoda, Brisbane, Hyderabad, Jeddah, Houston, Edmonton, Seoul, Jaipur, Kanpur, Thane, Ho Chi Minh City, La Victoria, Singapore, Kuala Lumpur, Dallas, Melbourne, Cairo, Lagos, Toronto, Lahore, Noida, Nashik, Ulsan, Howrah, Ernakulam, Colombo, Perth, Faridabad, Karachi, Ludhiana, Nagpur, Bogota, Muscat, London, Port-of-Spain, Doha, Santiago, Al Jubail, Ranchi, Granada, Kolkata

---

Countries We Deliver To:
Germany, Iran, South Korea, Egypt, Croatia, Argentina, Peru, Hong Kong, Finland, China, Israel, Kenya, Azerbaijan, Vietnam, United Kingdom, Bangladesh, Estonia, Chile, Romania, Venezuela, Bhutan, Namibia, Brazil, Macau, Indonesia, Austria, Yemen, Hungary, Canada, Ghana, Gambia, Algeria, Russia, Sweden, Portugal, Taiwan, Czech Republic, Angola, Ukraine, Netherlands, Poland, Qatar, Bolivia, Chile, Jordan, Sri Lanka, Kuwait, India, Mexico, Belgium, Belarus, Ecuador, Nigeria, Mexico, Lebanon, Kazakhstan, Bahrain, Oman, Iran, Tibet, Denmark, Slovakia, Malaysia, Afghanistan, Nigeria, Puerto Rico, Turkey, France, Saudi Arabia, Singapore, Mongolia, Morocco, Nepal, Philippines, Poland, Serbia, Zimbabwe, Costa Rica, Colombia, Greece, Lithuania, Japan, Libya, Gabon, New Zealand, Ireland, Switzerland, Italy, Spain, Norway, Australia, United Arab Emirates, Bulgaria, South Africa, Iraq, United States, Thailand, Trinidad & Tobago, Tunisia